Wheat Bushels to Tonnes Converter
Convert wheat bushels to metric tonnes from a 60 lb per bushel basis, with moisture or contract allowance support.
Enter Wheat Quantity
Wheat Result
Ready
Share this wheat conversion
Common Wheat Checks
- 100 bushels is about 2.722 tonnes at 60 lb/bu.
- 1,000 bushels is about 27.216 tonnes, close to a bulk load.
- One tonne is about 36.744 wheat bushels at the default basis.
Wheat Bushels To Tonnes Table
At 60 lb per bushel, one wheat bushel equals 27.2155422 kg, or 0.0272155422 metric tonnes. This makes wheat heavier than oats and heavier than barley for the same bushel count. The rows below are intended for quick checks beside the live converter. They assume no allowance and the default 60 lb/bu basis. If a document gives a different wheat basis, or if a moisture adjustment has to be shown, use the fields above.
| Wheat Bushels | Metric Tonnes | Planning Note |
|---|---|---|
| 10 bu | 0.272 t | Small sample or sack comparison |
| 25 bu | 0.680 t | Part-bin line |
| 50 bu | 1.361 t | Small trailer check |
| 100 bu | 2.722 t | Yard movement estimate |
| 250 bu | 6.804 t | Store sheet comparison |
| 500 bu | 13.608 t | Partial lorry load |
| 1,000 bu | 27.216 t | Close to a bulk load |
| 2,000 bu | 54.431 t | Two-load scale check |
| 5,000 bu | 136.078 t | Contract parcel comparison |
| 10,000 bu | 272.155 t | Store or season total |
Wheat Formula Method
Formula: tonnes = wheat bushels x lb per bushel x 0.45359237 / 1,000.
Default basis: 60 lb per wheat bushel. One tonne divided by 0.0272155422 gives about 36.7437 bushels.
1 Confirm that the crop is wheat. A barley or oats bushel basis would change the answer.
2 Keep 60 lb/bu unless a grain record, merchant note or contract states another basis.
3 Convert pounds to kilograms with 0.45359237, then divide by 1,000 to reach tonnes.
4 Add an allowance only when the record says the displayed mass should be reduced.
Where Wheat Bushels Appear
UK grain records usually settle in metric tonnes, but wheat bushels still appear in international yield reports, market commentary, imported agronomy articles and some historical farm records. The phrase can be misleading if the crop is not named, because a bushel is not one fixed mass across all grains. Wheat’s 60 lb/bu planning basis makes it heavier than barley at 48 lb/bu and oats at 32 lb/bu.
This converter is therefore designed as an audit companion. It keeps the lb/bu basis visible, shows the reverse factor and adds a parcel comparison so the result can be checked against lorry, bin or store sizes. It does not decide grade, milling quality, feed value, protein, Hagberg, screenings, moisture settlement or buyer acceptance. Those points come from the contract and the test record.
Tonnes To Wheat Bushels Table
Reverse values help when a tonne-based UK figure needs to be compared with a bushel-based yield note or futures market article. These rows use 60 lb/bu and no allowance. A 29 tonne parcel is about 1,065.568 bushels, which is why a 1,000 bushel wheat line is close to a typical bulk load but not exactly the same.
| Metric Tonnes | Wheat Bushels | Check Point |
|---|---|---|
| 0.5 t | 18.372 bu | Small sample line |
| 1 t | 36.744 bu | Main reverse anchor |
| 2 t | 73.487 bu | Small movement check |
| 5 t | 183.719 bu | Part-load comparison |
| 10 t | 367.437 bu | Easy scale row |
| 20 t | 734.874 bu | Bulk lot check |
| 29 t | 1,065.568 bu | Load-size comparison |
| 50 t | 1,837.186 bu | Store or contract parcel |
| 100 t | 3,674.371 bu | Large store comparison |
| 250 t | 9,185.928 bu | Season or estate total |
Worked Wheat Checks
500 Bushels
Result: 13.608 tonnes before any allowance. This is a useful partial-load check for a store or merchant note.
1,000 Bushels
Result: 27.216 tonnes. That is close to, but still below, a 29 tonne comparison parcel.
29 Tonnes
Result: about 1,065.568 wheat bushels. This is a useful reverse figure for load planning.
Trade And Quality Boundary
The arithmetic is exact for the selected pound-per-bushel basis, but grain settlement is not only arithmetic. Wheat loads can be affected by moisture, screenings, admixture, grade, variety, protein, Hagberg, mycotoxin checks and buyer-specific terms. If the result will be used near a sale, purchase, insurance file or dispute, keep the conversion separate from the commercial decision and rely on the accepted record.
Related Wheat Mass Conversions
| Conversion | Factor At 60 lb/bu | Best For |
|---|---|---|
| 1 wheat bushel to kilograms | 27.2155422 kg | Main mass factor |
| 1 wheat bushel to tonnes | 0.0272155422 t | Bushel-to-tonne checks |
| 1 tonne to wheat bushels | 36.743712 bu | Reverse checks |
| 1,000 wheat bushels to tonnes | 27.215542 t | Load planning |
| 1 wheat bushel to pounds | 60 lb | Commodity basis checks |
| 1 wheat bushel to US short tons | 0.03 short tons | North American mass comparison |
| 1 wheat bushel to UK long tons | 0.0267857 long tons | Older imperial mass note |
| 500 wheat bushels to kilograms | 13,607.771 kg | Partial bulk movement |
| 29 tonnes to wheat bushels | 1,065.568 bu | Lorry-size check |
| 100 tonnes to wheat bushels | 3,674.371 bu | Store total comparison |
FAQs
How many tonnes are in one wheat bushel?
At 60 lb per bushel, one wheat bushel equals 27.2155422 kg, or 0.0272155422 metric tonnes. Rounded for everyday grain planning, that is about 0.0272 tonnes. If your source gives another wheat basis, enter it before copying the result.
How many wheat bushels are in one tonne?
One tonne is about 36.7437 wheat bushels at 60 lb/bu. This reverse factor is useful when a UK tonne figure has to be compared with a bushel-based yield note, futures article or imported report.
Why is wheat heavier than oats by bushel?
Commodity bushel conversions attach different standard weights to different crops. Wheat is commonly listed at 60 lb/bu, barley at 48 lb/bu and oats at 32 lb/bu. That is why the crop name must be known before a bushel value can be converted to tonnes.
Does the allowance field copy grain settlement rules?
No. The allowance field applies a plain percentage deduction to the converted mass. Settlement rules can include contract-specific moisture, quality and delivery terms. Those terms should be read from the buyer’s documents or the agreed contract.
Can this be used for wheat futures or yield comparisons?
It can help convert between bushel-based and tonne-based quantities, which is useful when reading international market or yield material. It does not provide price, currency, hedge, grade or delivery advice.
Why does 1,000 bushels not equal exactly 29 tonnes?
At 60 lb/bu, 1,000 wheat bushels equal about 27.216 tonnes. A 29 tonne parcel is about 1,065.568 bushels. The load comparison field makes that difference visible instead of rounding it away.
What should I keep with the answer?
Keep the original bushel or tonne figure, crop name, 60 lb/bu basis or custom basis, allowance percentage, result, source document and date. That record makes the conversion easier to audit later.
Sources
- Texas Legislature. (n.d.). Agriculture Code, Chapter 13: Weights and Measures. Texas Constitution and Statutes. https://statutes.capitol.texas.gov/Docs/SDocs/AGRICULTURECODE.pdf
- National Institute of Standards and Technology. (2008). Guide for the Use of the International System of Units (SI), Special Publication 811. National Institute of Standards and Technology. https://www.nist.gov/pml/special-publication-811
- Bureau International des Poids et Mesures. (2019). The International System of Units (SI), 9th edition. Bureau International des Poids et Mesures. https://www.bipm.org/en/publications/si-brochure