Bushels Barley to Tonnes Converter
Convert barley bushels to metric tonnes from a 48 lb per bushel basis, with optional shrink allowance and load planning.
Enter The Grain Figure
Barley Shortcuts
- 100 bushels gives a small trailer or bin check.
- 1,000 bushels sits close to a single bulk grain movement.
- 5,000 bushels is useful for store and contract planning.
Converted Result
Ready
Share this barley conversion
Barley Bushels To Tonnes Table
This table uses the default barley basis of 48 lb per bushel and no shrink deduction. It is a useful first check because one bushel of barley equals 21.77243376 kg on this basis, or 0.02177243376 tonnes. The reverse value is about 45.9296 barley bushels per tonne. If your ticket, merchant, elevator, maltster or grain store states a different bushel weight, use the converter above rather than copying the table.
| Barley Bushels | Metric Tonnes | Good Check |
|---|---|---|
| 10 bu | 0.218 t | Small sample or bagged grain note |
| 25 bu | 0.544 t | Part-bin reconciliation |
| 50 bu | 1.089 t | Farm-scale planning figure |
| 100 bu | 2.177 t | Small trailer comparison |
| 250 bu | 5.443 t | Yard movement or short store line |
| 500 bu | 10.886 t | Medium bin or partial lorry load |
| 1,000 bu | 21.772 t | Bulk grain movement check |
| 2,500 bu | 54.431 t | Harvest day or merchant note |
| 5,000 bu | 108.862 t | Contract parcel comparison |
| 10,000 bu | 217.724 t | Store total or season summary |
Barley Conversion Formula
Formula: tonnes = bushels x pounds per bushel x 0.45359237 / 1,000.
Default barley basis: 48 lb per bushel. That makes one barley bushel 21.77243376 kg, or 0.02177243376 tonnes.
Reverse formula: barley bushels = tonnes x 1,000 / (pounds per bushel x 0.45359237).
1 Start with the bushel figure and check that it refers to barley, not wheat, oats, maize or a mixed grain line.
2 Confirm the lb/bu basis. Barley is commonly listed at 48 lb/bu, while other crops use different standard weights.
3 Convert pounds to kilograms with 0.45359237 kg per pound, then divide by 1,000 to reach tonnes.
4 Apply any stated shrink deduction only when you have a clear reason, then keep that percentage with the copied result.
What The Result Can And Cannot Settle
The answer is a transparent unit conversion. It is suitable for planning tonnage, comparing a bushel-based note with a metric store sheet, estimating how a barley parcel fits into a lorry or bin, and checking whether a quoted figure is in the right order of size. It does not replace a weighbridge ticket, a merchant settlement statement, a moisture schedule or a malting barley quality assessment.
Barley trading can involve test weight, moisture, screenings, admixture, protein, germination, variety, storage condition and contract wording. Those details can matter more than the arithmetic factor. If money changes hands, keep the original bushels, the lb/bu basis, any deduction, the converted tonnes and the source document together so that the conversion can be checked later.
Tonnes Back To Barley Bushels
Reverse rows are helpful when UK paperwork is in tonnes but a North American market note, yield comparison or agronomy article is in bushels. The values below use the same 48 lb/bu basis. A reverse check is also the simplest way to catch a direction error: if 10 tonnes does not come back to about 459 bushels, the factor or crop basis has probably been changed.
| Metric Tonnes | Barley Bushels | Rounding Note |
|---|---|---|
| 0.5 t | 22.965 bu | Usually rounded to 23 bu |
| 1 t | 45.930 bu | Anchor value for one tonne |
| 2 t | 91.859 bu | Small movement check |
| 5 t | 229.648 bu | Part-load comparison |
| 10 t | 459.296 bu | Useful mental scale row |
| 20 t | 918.593 bu | Close to a 1,000 bu lot |
| 29 t | 1,331.959 bu | Example lorry-size check |
| 50 t | 2,296.482 bu | Store and contract planning |
| 100 t | 4,592.964 bu | Large parcel comparison |
| 250 t | 11,482.409 bu | Season or store total |
UK Grain Paperwork And Bushel Figures
UK farm, merchant and maltster paperwork normally records barley tonnage in metric tonnes and quality in terms such as moisture percentage, screenings, nitrogen or specific weight. Bushels are more common in North American yield reports, futures market commentary and older conversion tables. That difference is why this converter keeps the pound-per-bushel basis visible instead of hiding it behind a single number.
A bushel began as a dry volume measure, but commodity conversions often treat it as a standard commodity weight. For barley, the common planning weight is 48 lb per bushel. That does not mean every physical container marked as a bushel holds the same mass of every barley sample. Grain variety, kernel size, damage, moisture and cleaning can all alter real weight. For UK planning, treat the bushel figure as a quoted convention and the tonne figure as the metric mass comparison. For settlement, rely on the documents and rules accepted by the buyer and seller.
Worked Barley Examples
500 Bushels
Result: 10.886 tonnes at 48 lb/bu. This is below half of a 29 tonne load, so it is best read as a partial-load or store reconciliation figure.
1,000 Bushels With 2% Deduction
Result: 21.337 tonnes after deduction. The straight value is 21.772 tonnes, then the allowance reduces the displayed figure.
29 Tonnes Back To Bushels
Result: about 1,331.959 bushels. This helps compare a UK lorry movement with a bushel-based yield or market note.
Related Barley Mass Conversions
| Conversion | Factor At 48 lb/bu | Best For |
|---|---|---|
| 1 barley bushel to kilograms | 21.77243376 kg | Small-scale mass check |
| 1 barley bushel to tonnes | 0.02177243376 t | Main converter factor |
| 1 tonne to barley bushels | 45.92963764 bu | Reverse comparison |
| 1,000 barley bushels to tonnes | 21.77243376 t | Bulk movement planning |
| 1 barley bushel to pounds | 48 lb | Commodity basis check |
| 1 barley bushel to UK long tons | 0.0214286 long tons | Older imperial mass comparison |
| 1 barley bushel to US short tons | 0.024 short tons | North American mass note |
| 1 tonne to pounds | 2,204.62262185 lb | Auditing the reverse formula |
| 1 kg to barley bushels | 0.04592964 bu | Small sample comparison |
| 29 tonnes to barley bushels | 1,331.959 bu | Lorry-size estimate |
FAQs
How many tonnes are in one barley bushel?
At the default 48 lb per bushel basis, one barley bushel is 21.77243376 kg, which is 0.02177243376 metric tonnes. For everyday planning, that is often shown as 0.02177 tonnes. If your grain document states a different pound-per-bushel basis, enter that basis in the converter because the tonne result will change directly with it.
Why is barley different from wheat or oats?
Bushel conversions are commodity-specific when they are treated as weight conversions. Wheat is commonly listed at 60 lb per bushel, oats at 32 lb per bushel and barley at 48 lb per bushel. A bushel count without the crop name is therefore incomplete. Always keep the crop name beside the number before converting to tonnes.
Should I enter a moisture deduction?
Leave the deduction at zero unless a contract, merchant note or planning worksheet gives a clear percentage to deduct. The field applies a simple percentage reduction to the converted mass. It does not reproduce a buyer’s settlement schedule, moisture table, screening deduction or malting quality rule.
Can I use this for UK barley trading?
Use the result as a unit conversion and planning check only. UK trading should rely on the agreed contract, accepted weighing method, moisture reading, sampling result and settlement statement. The converter is helpful when you need to compare bushel-based information with metric tonnes, but it cannot decide payment, grade or acceptance.
What does the lot size field do?
The lot size field compares the converted tonnage with a tonne-based load, bin, store or contract parcel. For example, if the lot size is 29 tonnes, the result shows how many 29 tonne lots the barley mass represents. It does not change the conversion factor; it only adds a logistics comparison.
Why does another page give a different bushel answer?
The usual reasons are a different crop, a different lb/bu basis, a US short ton instead of a metric tonne, a long ton instead of a tonne, or rounded factors. This converter uses pounds to kilograms at 0.45359237 and defines one metric tonne as 1,000 kg.
What should I record with the copied answer?
Record the starting value, direction, 48 lb/bu basis or custom basis, shrink percentage, result in tonnes or bushels, and the date of the source document. That record makes the answer easier to audit when it is compared with a weighbridge ticket, store sheet or merchant statement later.
Sources
- Texas Legislature. (n.d.). Agriculture Code, Chapter 13: Weights and Measures. Texas Constitution and Statutes. https://statutes.capitol.texas.gov/Docs/SDocs/AGRICULTURECODE.pdf
- National Institute of Standards and Technology. (2008). Guide for the Use of the International System of Units (SI), Special Publication 811. National Institute of Standards and Technology. https://www.nist.gov/pml/special-publication-811
- Bureau International des Poids et Mesures. (2019). The International System of Units (SI), 9th edition. Bureau International des Poids et Mesures. https://www.bipm.org/en/publications/si-brochure