Mbps to GB per Day Converter
Convert a megabits-per-second rate into daily gigabytes for continuous transfers, cameras, servers, cloud sync and data-cap planning.
Daily Data Inputs
Daily Data Result
Based on 24 active hours at 100% utilisation.
Recent Checks
Share this Mbps to GB/day conversion
What Daily GB Means
Mbps describes the rate at which bits can move each second. GB per day describes the amount of data moved over a day. The conversion is important for anything that runs for many hours: security cameras, server replication, remote backups, telemetry, livestream encoders, cloud storage sync and capped mobile broadband. A 10 Mbps continuous rate can move about 108 GB in a day using decimal units.
The active-hours and utilisation fields stop the answer from pretending that every connection runs flat out all day. A camera may use a near-steady bitrate for 24 hours. A backup service may run for 6 hours overnight. A shared office line may be busy during working hours but quiet outside them. Entering those real usage patterns makes the daily estimate much more useful than a plain 24-hour maximum.
Formula And Unit Method
bits per day = Mbps x 1,000,000 x active hours x 3600 x utilisation percent / 100
decimal GB per day = bits per day / 8 / 1,000,000,000
binary GiB per day = bits per day / 8 / 1,073,741,824
decimal shortcut for 24 hours at 100% = Mbps x 10.8
The shortcut is handy for quick checks: 1 Mbps running all day is about 10.8 GB per day. If the connection is active for only 12 hours, halve the value. If it averages 50% utilisation while active, halve it again. The binary GiB result is smaller because a GiB is larger than a decimal GB.
Daily Planning Examples
Camera Feed
A 4 Mbps camera running 24 hours at a steady bitrate is about 43.2 GB/day before storage overhead, clips, metadata or retention rules.
Night Backup
A 50 Mbps backup running 6 hours at 70% utilisation is about 94.5 GB/day, which may be easier to fit inside a quiet window.
Mobile Router
A 5 Mbps stream for 8 hours at full use is about 18 GB/day, enough to matter on a capped SIM plan.
Mbps To GB/day Conversion Table
| Mbps | GB per day at 24 hours | Planning note |
|---|---|---|
| 0.5 Mbps | 5.4 GB/day | Low-rate telemetry or audio-type workload. |
| 1 Mbps | 10.8 GB/day | Simple mental shortcut anchor. |
| 2 Mbps | 21.6 GB/day | Small continuous camera or device feed. |
| 5 Mbps | 54.0 GB/day | Can use a large share of a mobile data allowance. |
| 10 Mbps | 108.0 GB/day | Default example for continuous throughput. |
| 20 Mbps | 216.0 GB/day | Heavy daily movement if left running. |
| 50 Mbps | 540.0 GB/day | Office or backup workload; check storage retention. |
| 100 Mbps | 1080.0 GB/day | About 1.08 TB/day in decimal units. |
| 250 Mbps | 2700.0 GB/day | Large replication or media workflow. |
| 1000 Mbps | 10800.0 GB/day | Gigabit link maximum, not a normal sustained assumption. |
Related Daily Data Conversions
| Check | Formula | Best use |
|---|---|---|
| Mbps to GB/hour | Mbps x 0.45 | Plan a short transfer window. |
| Mbps to GB/month | GB/day x days | Check monthly data caps. |
| GB/day to Mbps | GB/day / 10.8 | Find the continuous rate behind a daily amount. |
| Mbps to MB/s | Mbps / 8 | Compare with file copy rates. |
| Mbps to MB/min | Mbps x 60 / 8 | Compare with transfer logs. |
| GB/day to TB/month | GB/day x days / 1000 | Storage and retention planning. |
| Active-hour adjustment | full-day value x hours / 24 | Use when traffic is scheduled. |
| Utilisation adjustment | active value x percent / 100 | Use when traffic is bursty. |
| Binary GiB/day | bits / 8 / 1,073,741,824 | Match software storage views. |
| Decimal GB/day | bits / 8 / 1,000,000,000 | Match provider plans and storage labels. |
Daily Data Cap And Retention Notes
A daily amount can look small as a speed but large as storage. Ten megabits per second may sound modest, yet it can exceed 3 TB in a 30-day month if it runs continuously. That is why data caps, surveillance retention, off-site backups and server replication need amount-based planning as well as speed-based planning.
For storage retention, multiply the daily amount by the number of days kept. Then add any overhead for file containers, indexes, thumbnails, snapshots, parity, compression limits or duplicate copies. For capped connections, compare the daily estimate with the allowance after normal household or business traffic. A process that is harmless on an unlimited fixed line may be expensive on a capped SIM or roaming plan.
Reading The Daily Result Alongside Logs
Device logs may report traffic per calendar day, per rolling 24 hours, or since the last restart. Match that reporting period before comparing with the converter. A camera restarted at midday may show half a day of traffic, while a provider portal may show a billing-day total. If the two figures differ, first check the time period, then check whether uploads, downloads, thumbnails, alerts and remote viewing are all counted in the same way.
FAQs
How many GB per day is 1 Mbps?
One Mbps running continuously for 24 hours is about 10.8 GB per day in decimal units. That assumes the rate is sustained for the full day and that the unit is decimal GB rather than binary GiB.
Why does the calculator have active hours?
Many tasks do not run all day. A scheduled backup, work-hours camera feed or overnight sync should be calculated for the hours it is active. Active hours prevent a short task from being overstated as a 24-hour load.
What does utilisation mean?
Utilisation is the share of the active period where the connection is actually moving data at the entered rate. A 50 Mbps link at 50% average utilisation moves the same daily amount as 25 Mbps at 100% utilisation for the same hours.
Should I choose GB or GiB?
Choose decimal GB for provider data plans, storage labels and most public-facing usage estimates. Choose GiB when matching software that clearly reports binary units. Keep the choice with the result when sharing it.
Can this estimate camera storage?
Yes, if you know the sustained bitrate and recording hours. For a full retention plan, also add audio, metadata, motion-only recording rules, compression changes, exported clips and any duplicate backup copy.
Does the result include network overhead?
No. It is a unit conversion from the rate entered, adjusted only by your active hours and utilisation fields. Protocol overhead, retries and storage containers may change the real amount recorded by a device or provider.
Sources
- Bureau International des Poids et Mesures. (2019). The International System of Units, 9th ed. BIPM. https://www.bipm.org/en/publications/si-brochure
- National Institute of Standards and Technology. (2008). Guide for the Use of the International System of Units, Special Publication 811. NIST. https://www.nist.gov/pml/special-publication-811
- International Electrotechnical Commission. (n.d.). Prefixes for binary multiples. IEC. https://www.iec.ch/